This file can be used in the following paths:
- • c:\winavr-20100110\bin\
- • c:\program files (x86)\aomei backupper\
- • c:\etiquetas\cybersineslda\software\arduino-0021\arduino-0021\hardware\tools\avr\bin\
- • c:\program files\arduino\hardware\tools\avr\bin\
- • c:\minibloq.v0.83\lang\winavr\v20090313\bin\
- • c:\program files (x86)\arduino\hardware\tools\avr\bin\
- • c:\avrdude\
- • c:\program files\aomei partition assistant standard edition 5.6\
- • c:\program files\aomei backupper professional edition 2.0.3\
- • c:\program files (x86)\aomei onekey recovery 1.2\
- • c:\program files (x86)\aomei partition assistant standard edition 6.6\
- • c:\adruino\avrdudeprog33\avrdude\giveio\
- • c:\adruino\avrdudeprog33\avrdude\
- • c:\program files (x86)\aomei partition assistant\ddm\
- • c:\program files (x86)\aomei partition assistant\
- • c:\program files (x86)\labcenter electronics\proteus 8 professional\tools\arduino\hardware\tools\avr\bin\
- • c:\admin\appdata\local\arduino15\packages\arduino\tools\avrdude\6.3.0-arduino16\bin\
The above paths are the common paths where this file is located, but does not mean that it must be stored in the above paths. The file should be stored in the actual installation path of the software.
Tip: If you cannot find the software installation path, you can follow the path suggested above, find one by one, and put the file inside the path found.