This file can be used in the following paths:
- • c:\prash\courses\xilinx_ise_ds_win_14.7_1015_1\xilinx_ise_ds_win_14.7_1015_1\bin\nt\
- • c:\prash\courses\xilinx_ise_ds_win_14.7_1015_1\xilinx_ise_ds_win_14.7_1015_1\bin\nt64\
- • c:\program files (x86)\kepware\kepserverex 5\
- • c:\program files (x86)\kepware\kepserverenterprise 5\
- • c:\autodesk\powermill_ultimate_2018_ml_win_64bit_dlm\x64\amdeu\program files\autodesk\manufacturing data exchange utility 2018\sys\exec64\
- • c:\autodesk\powershape_ultimate_2018_ml_win_64bit_dlm\x64\cmm\program files\autodesk\cmmdriverforppro 2018\sys\exec64\
- • c:\program files (x86)\national instruments\shared\ni opc servers\v5\
- • d:\kepware\kepserverex 6\
- • c:\program files (x86)\proficy\proficy view integrated opc driver 5\
- • c:\program files (x86)\dvr_webocx_p\
- • c:\program files (x86)\herospeed cms\
- • c:\program files (x86)\proficy\proficy view integrated opc driver 5\embedded\quickpanel\
- • c:\program files (x86)\proficy\proficy view integrated opc driver 5\embedded\quickpanelplus\
The above paths are the common paths where this file is located, but does not mean that it must be stored in the above paths. The file should be stored in the actual installation path of the software.
Tip: If you cannot find the software installation path, you can follow the path suggested above, find one by one, and put the file inside the path found.